Details introduction of JPT series laser source-Ivy

Details introduction of JPT series laser source

The lasers of the JPT LP series belong to the mopa structure
The internal structure of a pulsed fiber laser is divide into two types:
1.MOPA structure (MOPA structure is divide into pulse width non-adjustable LP series and pulse width adjustable M, LM series)
2.Q-switched structure

(Pulse width non-adjustable LP series) The advantages of lasers over other brands’ Q-switched (pulse width non-adjustable) are as follows:
Take pulse width 20w as an example

1.First pulse available
(The first pulse of Q switch is not available, you need to wait for the first time after the power is turn on)

2.Zero delay for marking
(Q-switching has a delay, so it is not suitable for marking on the assembly line)

3. No light leakage during marking
(There will be light leakage in the front, middle and rear sections of Q adjustment. Observation with a magnifying glass will show that the uniformity of the marking is inconsistent)

4. Wider frequency range, higher efficiency and faster.
Such as pipeline marking, the higher the frequency, the faster the speed and the higher the efficiency (Jeep’s adjustable 1-600khz, Q-adjusted 20-80khz)

5. Single point of energy is stronger
(Jepert is 0.8mj, Q is 0.6mj, mj value affects the marking efficiency, the higher the mj value, the higher the efficiency)

6. The light spot is smaller, metal and plastic can be marked, and the text and patterns marked on the plastic will be more clear and delicate.

JPT LP (pulse width is not adjustable) and LM1 (pulse width is adjustable) series are used for deep metal carving, sheet welding, cutting, surface paint removal, high power laser cleaning and rust removal.
The difference between the pulse width is not adjustable and adjustable. After the pulse width is adjustable, you can modify the shading and the border to modify the burrs. The pulse width is not adjustable and cannot be modified. The carving is relatively rough.