Anti-freezing work of laser cutting machine:Charry

Anti-freezing work of laser cutting machine

Anti-freezing work of laser cutting machine

Due to the unique structure of fiber lasers, improper operation mode may cause serious damage to the inner core components of fiber lasers in the operating environment with low temperature. Therefore, the fiber lasers in the cold winter more need to care.
In order to help you better protect the laser equipment, extend the life of the machine, the hundred-dimensional laser to provide you with the following solutions:
1. First of all, please strictly follow the instructions of the hundred-dimensional laser operation. The ambient operating temperature of the hundred-dimensional fiber laser is allowed to range: 10 ℃-40 ℃.
2. Extreme hypothermia can cause the internal waterway of the laser to freeze and not work properly. Therefore, the hundred dimensional proposal:
• Please add in the water chiller tank based on glycol. Allowing the addition of solution to the measurement range: 10%-20% of the container, for example: your chiller tank capacity is 100 liters, add based on ethylene glycol can not exceed 20 liters.
In addition, the addition of ethylene glycol is based on the need to consult your chiller manufacturer.
• Low ambient temperatures during the winter months, such as the laser water pipe connection is placed outdoors.It is strongly recommended that customers do not close the chiller in this case. (If your laser has a maximum power of 2-kilowatt (including) above, you must turn on the laser 24 volt power switch while running the chiller).

Anti-freezing work of laser cutting machine

3. If the ambient temperature of the laser is used between 10℃-40℃, no antifreeze is added. In addition, in summer, please clean the antifreeze in the refrigerator, and then inject distilled water for use.
4. If you do not add antifreeze, you can keep the cold water cooler for 24 hours without shutting off the machine.
5. If your laser is in a long-term downtime in winter, be sure to drain the residual water from the laser water pipe.
6. If the laser in the low-temperature weather need to transport or repair, also must be the residual water in the laser drainage dry before packing transport.
7. If your laser maximum power is above 2-kilowatt (including), please be sure to drain the laser power, otherwise, the internal water of the laser solenoid valve will not be opened due to the normal drainage.
Sharing some cutting samples with you:

Anti-freezing work of laser cutting machine

If you need more details,you can contact us:
Email;xintian111@xtlaser.pl
Whatsapp:+8618253165863
Skype:Charry XTLASER Zhu